Arena Rex - unboxing the Zephyri Starter Box (Review)

As I mentioned in a previous post, Arena Rex is rapidly becoming quite popular at the local gaming store.

I'm in the process of building an arena table for it, but in the meantime I picked up a starter box. Thos of you that know me and my passion for Vikings, will not be surprised that I chose the Zephyri. This faction comes from the fringes of the Empire, and is a blend of Norse and Native American aesthetics. Couple that with the fact that the Zephyri Starter Box comes with one of the best looking models (in my humble opinion) for the game, and for me the choice was easy.

Zephyri Starter Box

The models are all completely resin (with one exception that will be noted later) and as a consequence the package is extremely light. I must admit, I felt strange about paying $50 for a box that felt empty.

So, given that the box is certainly NOT empty, what does it contain?

Contents of the Zephyri Starter Box.

Inside the large bag are three models and various game aids and cards:

• Frigge 
• Bjarrhvit 
• Sven 
• Three 4x6 art cards 
• Three game cards 
• Three plastic Arena Rex bases and tokens 
• Zephyri Benefits card 
• Pit hazard card 

First the cards:

The card contents.

The three art cards are beautiful. Of course they're not used for the game itself, but they're really nice to have. Each figure also comes with a stat card for use in the game, which details its characteristics, damage output, special abilities, etc. There's another card with special rules detailing the benefits of running a Zephyri cohort (if at least 75% of your cohort comes from this faction, you get bonuses). Lastly, there's a square card with a pit hazard. I'm planning on modeling an arena with actual pits carved into the floor, so do not have a need for it, but it is a neat addition to the set and lets you place additional pits anywhere on the board.

Of course, the real stars of the set are the figures! So, what do they consist of?

The figures, bases and fatigue tokens.

Each figure comes individually bagged, and is accompanied by a plastic base and a plastic fatigue token. Including the tokens is a nice touch. The tokens are double sided (one side is used for a character that is fatigued and the other for an exhausted figure). The bases are, well, basic. This set comes with two 300 round bases for Sven and Frigge, and a 40mm round base for Bjarrhvit.

Since Sven is the most Viking-looking figure in the bunch, it's not a shock I chose to start with him. Plus, he comes with the fewest parts so I (rightly) thought he'd be the easiest to assemble.

Sven

He consists of the main body, a hand holding a sword and a hand with a spear (the spear hand is metal - the only metal piece in the set). As you can see in the photo above, the resin cast had a lot of tiny, feathery flash (this was present on all the casts). It does not impact the overall quality of the cast, but it is annoying to get rid of.

Sven, ready for gluing.

I am a bit particular about my figures, so I decided to pin Sven in place on the base. I also pinned his hands. For those that are not familiar with the process, pinning is a simple means of getting a stronger joint between parts.

First drill a small hole in the parts you want to glue together. It is important that the holes line up exactly. You put a drop of superglue in one hole, following by a small piece of wire. You clip it close, creating a small pin that fits into the hole on the other part, then you glue it in place as well. The figures had small resin pins, but they did not provide as strong as a join as I wanted, which is why I went ahead and pinned them for strength. (My figures tend to take a beating, literally as well as figuratively.)

Tools used to assemble the figures.

The photo above shows the tools I used in assembling Sven and the other figures. From bottom: clippers to remove the parts from the sprue; a pin vise with a small drill bit used for pinning; a small piece of wire to serve as the pin; a craft knife for removing flash; a toothbrush, which I found quite useful in removing the very small bits of flash.

And here he is: Sven in all his glory!

Sven (left) and a Gripping Beast figure.

I put Sven next to another figure to show the difference in scale. The figure on the right is a Gripping Beast model from their Pagan Rus boxed set for Saga. As you can see, Sven is clearly head and shoulders above the Rus figure. You can also appreciate the wonderfully intricate detail of the resin casting as well.

Next up - Frigge. I made another assumption (this one incorrect) that the most complicated model to assemble would be Bjarrhvit since she is the most impressive in the box. Frigge is a beautiful figure that consists of several small, fiddly parts that I found to be a nuisance to place properly.

Frigge

The casting has the same feathery flash, though there was less of it. I had to make use of the excellent photos on the Arena Rex website for reference, as I was not certain exactly where all the feathers and braids went. As I did with Sven, I pinned the hand holding the axe. Frigge's leg and left arm fit very nicely without pinning, so I just used superglue. There's feathers that go on the shield, which were easy to place. On her head she has a braid in the back that's a separate piece, as well as a small braid with feather and a larger group of feathers that go on the side of her head. With patience, super glue, and a little green stuff, I got the parts placed properly. Once the green stuff dries completely I will clean up the joints.

Frigge - this is a beautiful model!

That left the big boss, Bjarrhvit.

Bjarrhvit

Bjarrhvit consists of the main body, both arms, and the single most detailed piece in the set - her gorgeous braided polar bear cloak.

Likely because of the complexity of the cast for the cloak, this is the piece that had the most issues in the set I bought.

Tip of one braid broken off.

The very tip of the longest braid was broken, as you can see in the detail insert above. To me, this is not a big deal as the braid still flows elegantly and will look great. No one will even know the tip is missing.

Miscast tips of other braids.

The end of another braid was miscast, looking more like a spearpoint, and the braid that it connected to had quite a bit of flash right beside where it met the sprue. (Again, see insert photo above.) I cleaned these up, but the area where I removed this flash lacks detail. In the scheme of things, this is not a big deal, as there is so much going on with Bjarrhvit's cloak I doubt anyone will notice these small marred areas.

Completed Bjarrhvit.

Above you can see the completed Bjarrhvit. I did pin her right arm, but her left arm fit perfectly with the small resin positioning nub provided. I am certainly not the best figure painter, but I am looking forward to painting these (Bjarrhvit in particular). The amount of detail in these casting is very impressive.

The gangs all here!

The game can be played with cohorts made up of any number of figures, but the rules recommend groups of three to start. This boxed set provides that, along with all the accessories needed to play.

My verdict:

9 out of gladiators approve!

I gave this set 9 out of 10 gladiators.

First of all, the cards (both the art postcards as well as the game cards) are quality products. They look great and are printed on thick, glossy cardstock. The printed pit was a nice bonus. The plastic fatigue tokens are basic, but functional, and will serve their purpose well.

While those accessories are nice, it is the figures that people buying this set are really after, and I must say these figures are amazingly detailed and wonderfully sculpted. The poses are very dynamic. Sven's description from the Arena Rex website says he is "a patient warrior who favors maneuvering around his opponents and exhausting them before closing in for the kill." His pose shows exactly that, as he appears to be circling his victim. Frigge is poised in mid-step, charging with her shield held high and her axe ready to strike. Bjarrhvit's pose is magnificent, with the highlight of course being the flowing cloak, with the braids whipping around her. 

I mentioned the small issues I found with the castings. While admittedly minor, I did think they were worth mentioning, especially with the price of these figures. They're definitely on the upper end of the price scale (leaving GW out of the equation), and I would have liked to see a little less flash. The starter box is a very good value, saving you about 20% compared to the cost of the individual figures. And in the starter box you get the Zephyri cohort bonus card and the pit.

Overall, I'd recommend this set to anyone interested in getting started in the game, as well as modelers looking for beautifully sculpted figures to paint. I can see these all as display pieces as well as playing pieces.

I have yet to see how this team performs in actual combat (hopefully a future post will discuss that), but any figures that make me this eager to get them painted up and on the table as soon as possible are worth their cost!

'Til next time!

Arena Rex - making the arena (Part 1)

A new game has swept onto the scene at the local game store: Arena Rex.

It's a fast and furious game of arena combat between various mythical factions and beasts. There is NO ranged combat - it's all close in and personal!

So, what does the game require in terms of terrain- an arena, of course! Filled with plenty of traps, hazards and other dangers.

A quick search of the internet showed that some people were using the Playmobil Roman arena (set 4270) as the basis for their gladiatorial terrain. In fact, the Arena Rex guys themselves take one to conventions!

Since I happen to have one of those arenas taking up space in my basement from my Playmobil-collecting days, that was obviously the easy way to go. I measure the arena, determined that it would fit perfectly on a 3' by 3' table, and set off to gather materials.

I used a 1/2 inch thick sheet of MDF for the base, cut to 3' by 3'. I framed it in 1x2s, making sure to countersink all the screw holes. Since the flat part would be the underside of the board, I wanted to make sure it would not scratch whatever surface it was placed on.

3' by 3' arena board (bottom view)

I also sanded it all the way around and slightly rounded the corners in order to removed any splinters and sharp edges.

Sanded corner, countersunk screw holes.

The completed frame, ready for paint.

I did not like the natural wood color, so I grabbed a can of dark brown spray paint from my stash and covered all the edges that would be visible.

Painted board.

The inside area would be filled with insulation foam. I bought a sheet of 1" thick foam (and was amazed at how expensive it has gotten!).

1" thick insulation foam.

The inside edge of the board is actually 1.5" tall, so I took some scrap pieces of packing foam that were 1/2 inch thick to make up the difference. Since I am a terrain maker and a pack rat, seldom does any packing material enter the house that it does not join my Styrofoam hoard.

After some careful cutting and fitting, here's the result:

Foam, cut and placed in the board.

Putting the foam inside the 1x2s will protect it from getting banged up and chipped. Foam is not the sturdiest of materials.

I did not glue the foam into place yet. Pits are an important part of the terrain. Much of the game involves knocking your opponents back with your attacks, and pushing them into a pit can be a very effective way of removing en enemy fighter from play.

I want the pits to be cut into the foam, so I placed the arena on the board to trace out the inside diameter and locate the pits before cutting them out. Once the pits are cut, I'll glue the foam down permanently.

Looking good so far.

In the meantime, I also started on simple hazards. I took a couple of bases I had sitting around, some chopsticks, a skull bead and a plastic torch and got to work.

Basic supplies for hazards.

I cut the sticks to size, sharpened the edges and pinned them to the base. I actually made them very sharp, and stabbed myself while putting the hazard together!

Spikes cut to length and ready for gluing.

I also made another hazard consisting of a pillar surrounded by spikes, with a skull-shaped torch holder.

Two hazards for the arena.

I'll add some sand and paint to finish them off.

I really enjoy the excitement of a new game. Planning new and different terrain, and seeing it take shape, is one of my favorite parts of this hobby. In fact, sometimes I enjoy making the terrain for a game more than actually playing it!

'Til next time!

Saga Accessories from Kraken Skulls Consortium (Review)

Last week, I saw where a local player had ordered some items from Kraken Skulls Consortium, and I was intrigued. They make a wide variety of laser-cut and engraved gaming accessories, in particular for Saga. I went to their site to have a look around.

My browsing fu was weak and I could not find what I was looking for. I found their Facebook page and asked if they made what I wanted - specifically, fatigue tokens with the Viking raven engraved on them. I got an immedaite response. Not only do they make them, they make three kinds! (wood, black acrylic and clear acrylic).

I placed an order for the tokens, along with some other goodies, on Friday. On Monday I got an email saying my order was complete and shipped, and they arrived today, Wednesday. That is great customer service and turnaround time on an order. So, does the hype and service match the product?

Let's start with the raven design fatigue tokens. I chose the wooden tokens, and I was not disappointed!

Raven design fatigue tokens from Kraken Skulls.

They look as good in person as they do on their website.They're a huge upgrade for me from the little plastic discs I was using (which I believe originally came from the Heroscape game).

In addition, I ordered a set of their measuring sticks. They have a ton of different designs, themed to match all the different factions available in Saga. I went with their generic weapon-shaped sticks, since I play several different armies.

Weapon shaped measuring sticks.

I love these sticks. You can see from the picture that they are spot on in length, and they look great. My daughter saw them and is already asking for a set for her Viking army as well!

I splurged a little, and ordered a pair of dice from Kraken Skulls as well. I got them with the raven logo to match the fatigue tokens. Of course, for a typical Saga game you need a ton of dice, so it is not cost effective to order as many as you will need for combat. But I plan to use these as turn markers, or perhaps for other games as well.

Transparent blue and white dice with raven logo.

I ordered the transparent blue and opaque white dice. I paid the extra buck per die to have them color them in, and I am glad I did. The dice look as good as the rest of their products. The blue is clear throughout with no bubbles. And in a totally unscientific test (I rolled them a bunch of times to see how often I could get the beautiful ravens to show) they seemed to roll quite randomly. That's already better than my regular dice, which tend to roll "1" with alarming regularity.

Lastly, since I love terrain projects, I ordered a set of their Viking tent frames. You get enough parts to make end frames for six tents for $3.50, or you can order the assembled frames for $2.50 a pair, or the complete tents for $3.50 each. (One very nice touch is that you can order different colored patterns for the complete tent kits.) Since I love to build and customize, I chose the unassembled frames.

Viking tent frames.

I plan on using these to make a Viking seaside encampment, with a beached longboat as well. I already have the 1:50 Revell kit, it just needs to be assembled and painted.

Revell Viking ship kit.

I'll post again once I use the frames to actually make the tents. I am still in the process of deciding what to use for the tent cloths.

But, in the meantime, I can wholeheartedly endorse the good folks at Kraken Skulls Consortium - fantastic service and fantastic products. I am certain to be ordering from them again (if nothing else to get my daughter her set of measuring sticks, and they have a selection of laser-cut buildings that look intriguing).

'Til next time!